E-Wave™

telemetry

Inquire About This Product

EPG’s E-Wave™ provides smart, effective and reliable automated, relay logic control using 900MHz, frequency hopping, spread spectrum radio technology. Spread spectrum technology combined with data encoding and proprietary protocol help eliminate false data interference due to radio or electro-magnetic sources. Thus any number of the EPG E-Wave™ system transmitters can work side by side with little chance of interference with each other or other sources.

900MHz technology is well suited to most landfill and industrial applications including start/stop pumps, sending shutdown alarm signals, storage tank high level shut off, leachate recirculation valve control and/or monitoring remotely located PLC inputs.

Signals in this frequency range can pass through concrete, glass, wood and other materials. Optimum performance requires line of sight between transmitter and receiver with respect to ground or foliage. Repeaters are available for applications with extreme range or major obstacles.

Typical Uses:

  • When lightning, gophers and excavating shorten wire life
  • Where installation of conduit and wire is too expensive or impractical
  • When obstacles such as parking lots, roads, or ponds must be crossed
  • When there is too much electrical interference in the area
Wireless Switches for Landfill Application, Modems, Wireless Radios, Landfill Equipment, Water and Wastewater Equipment
E-Wave Wireless Switch
E-Wave Wireless Switch Brochure, Telemetry Systems, Landfill Equipment and Water and Wastewater Equipment

You may also want to visit
NBT's Web Site. NBT is a division of EPG and provides modems, Radios, MTUs, RTU's, turnkey installation and system programming for telemetry and SCADA systems.

Case History: Data Acquisition


Welcome | About Us | Products | Newsletters | School | Contact | Search

© Copyright 2000-2002 EPG Companies Inc. All rights reserved.
19900 County Road 81 | Maple Grove, MN 55311